bearing types. Distinguishing design.
Free Stock:
storage, in a fenced area to protect against theft, weather resistant and theft-prone little
goods such as wood, construction materials, empty containers.
fastening the floor vents increased pollution and the background for the use of transport and Funding.
half open storage and covered storage offer no lateral protection, however, offer to create low construction and maintenance costs.
storage at semi-open storage area are as machinery, pipes, ore, steel.
Closed Stock:
goods to the weather and the risk of theft are exposed in closed storage, ie stored in warehouses or buildings.
you usually have all the facilities for storage, relocation, dispensing, measuring and weighing of goods to be stored to perform just like the rooms for the camp staff for the necessary administrative work and sanitation.
Bunker-/Silo- depots:
If storage containers for the storage of bulk solids, liquids or gases.
designs can be cylindrical or rectangular.
The heights can reach up to 50m and net capacity of 2.000m ³.
These camps are filled from above and continuous handling (loading).
sample is taken from the bottom of the outlet device.
design of the bearing
flat storage:
building up to about 7 meters in height where the camp is located.
referred to as a high-floor storage if the building heights to reach about 12 meters. You are suitable for block storage and shelf storage. Planning is important to ensure the appropriate support distance since the supports are taken into account when designing the layouts.
It is not often a staircase, lift, and the like present / necessary
floor warehouse:
stacked flat stock on several floors.
occasion is often to increase with small pieces of land around the camp area.
disadvantage is almost always the need to reach only the elevators's is a bottleneck in the material flow.
In planning the appropriate ceiling sustainability eighth.
Firemen and Escape options are limited on the upper floor.
design of the bearing
high-bay warehouse:
camp with a height of around 12 meters.
The highest bearing in practice, even from heights of 45m and a length 120m.
There are two basic designs :
a) fixed structure (concrete construction), the racks are free standing.
is retrofitted into an existing building with an appropriate volume of a high shelf.
b) the shelves themselves are used as a support structure for the walls and ceiling of the warehouse.
If the building exterior is made of lightweight profile sheets, the outermost points directly to the shelf are anmontiert. The roof is supported by extended shelf stand. Thus save the enormous cost of construction, types are suitable as a shelf-length, cross-members or shelves
warehouse is not used for other purposes as opposed to flat or floor storage.
high bay = Special purpose machines
design of the bearing
air dome Stock:
existence of a shed skin of a breathable fabric, this is like a balloon by fans spanned over a fixed base.
Access only through air locks.
They are mainly used as a substitute warehouse thanks to the rapid assembly and disassembly.
disadvantage
The vulnerability to storms and snowfall
is limited by the curved shape of the space utilization factor.
0 comments:
Post a Comment